Your furnace is an integral part of your home. Without one, you wouldn’t be able to stay warm during cold weather. Yet furnaces can have some problems that are more common than others.

Let’s go over these issues and discuss what they might cost to fix so you know before you call an HVAC technician. Some of the most common furnace repair problems include:

  • Furnace won’t turn on
  • Furnace doesn’t stay lit
  • Furnace won’t blow hot air
  • Furnace won’t turn off

1. My Furnace Can’t Start

There are a couple of reasons why your furnace won’t turn on, so make sure to check all of them.

  • Is your thermostat set right? Make sure it’s on “heat,” “auto” and that your desired temperature is higher than the room’s current temperature. If you have a programmable thermostat, make sure it has fresh batteries.
  • Is the circuit breaker tripped? Your furnace can’t run if it doesn’t have electricity. Reset the switch if it’s facing the outside of the electrical panel.
  • Is the furnace switch off? Your furnace has a power switch found on or near it. Because this switch resembles a light switch, it’s easy to accidentally turn it off. If it was off, it might take your furnace a few minutes to start.
  • Is the air filter clean? A dirty air filter can create a lot of issues for your furnace. Replace yours if you can’t see light through it.

Estimated Repair Cost

This issue can be complex, so the estimated cost to repair it varies according to what’s wrong.

2. My Furnace Won’t Stay Lit

Your furnace uses a specific sequence when it starts heating your home.

  1. Your thermostat notices the temperature has dropped and tells your furnace to turn on.
  2. The draft inducer fan activates to pull in fresh air for combustion.
  3. The gas valve unlocks for the burners, which are lit electronically.
  4. The flame sensor tells your furnace the burners have been lit.

If something is off during the sequence, your furnace will shut off as a safety precaution.

A couple of possible causes for this problem include:

  • Dirty or malfunctioning flame sensor. If the sensor doesn’t detect a flame, it will shut off your furnace to prevent natural gas from spilling into your home. The ignition process corrodes flame sensors as time passes. While cleaning during annual furnace maintenance can help, yours may ultimately need to be replaced.
  • Bad limit switch. This safety feature will shut off your furnace if it detects backdrafting. Backdrafting is dangerous, because carbon monoxide and natural gas can leak into your home. These switches can fail due to age, damage or dust buildup.
  • Old thermostat. If your thermostat isn’t working correctly, your furnace won’t be able to run.
  • Dirty air filter. A dirty air filter can restrict airflow and force your furnace to shut off to avoid overheating. Make sure to change yours every 30 to 90 days, or anytime you can’t see light through it.

Estimated Repair Cost

These costs are estimates, so it’s important to note yours may vary based on your furnace’s brand and model.

  • Flame sensor: $350–$500
  • Limit switch: $150–$300
  • Thermostat: $150–$350
  • Furnace filter: $10-$30

3. The Furnace Is Blowing Cold Air

In many instances, this problem is tied to an incorrect thermostat setting or a dirty air filter that’s limiting airflow. Use the steps above to resolve the issue.

4. My Furnace Isn’t Shutting Off

If it’s very chilly outside or you like your home to be toasty, your furnace may be running for a long time.

If this isn’t what’s happening, make sure your thermostat is set correctly and working properly. If your fan setting is at “on,” the blower motor will be going even when the furnace isn’t, so it’ll sound like your furnace is on all the time.

Otherwise, there might be a problem with the blower motor or your ductwork may be losing air, forcing your furnace to run constantly to make up for the lost air.

Estimated Repair Cost

These costs are approximations, so it’s important to note yours may be different based on your furnace’s brand and model.

  • New blower motor: $250–$800
  • Seal ductwork: varies based on square footage

Pratt Brothers Will Work Hard to Resolve Your Furnace Issues Quickly and Affordably

Furnace problems can be a costly headache, but not when you call Pratt Brothers. We’ve been delivering the quality, affordable furnace repair Jefferson homeowners have trusted since year. Contact us at 920-347-8495 to request your free estimate today.